The Toyota Tundra has a reputation: not only is it one of the most reputable & trustworthy light truck products on the market, the Tundra also comes with a glitch that becomes obvious when adjusting your ride height.
Have you figured out what that glitch might be? Unless you have astute visual perception or a vestibular system that can pick up the most subtle inconsistencies it might go undetected. A small experiment to help you out: take a tape measure or yard stick and measure from the bottom (6 O’clock) position of your wheel (not tire!) to the highest point of your fender. Do this for each wheel, and write down the result for each measurement.
A typical outcome would be:
- Driver’s front => 32.375″
- Passenger’s front => 31.75″
- Driver’s rear => 34.0″
- Passenger’s rear => 34.25″
Does anything strike you as odd when you go back and look at these numbers?
Toyota Tundra: different ride heights - from wheel-to-wheel!
Bingo! Your Toyota Tundra ride height can vary wildly from wheel-to-wheel: it’s side-to-side front ride height has been known to vary by as much as 1.0″!
When your ride height matters and you’re planning to install a leveling kit or lift kit and you haven’t corrected for these inconsistencies beforehand, you will be recreating the issue.
Let’s say you purchase a typical ‘fixed’ lift/leveling kit or spacer, designed to provide a 2.0″ front lift. After installation your front ride height will now be 2.0″ higher than your beginning ride height: your snout will be 2.0″ higher but with the same side-to-side ride height issues, just at a new ride height.
PRORYDE Patented Adjustable Leveling & Lift Kits
Now that we’ve identified the crux of the problem, what are our options?
While other manufacturers may provide ‘shims’ to make minor ride height corrections, PRORYDE products are specifically designed to solve these issues. Our patented and fully engineered ‘on-the-vehicle’ ADJUSTABLE products allow compensation for variations in side-to-side front ride heights IN ONE GO.
Don’t let a fixed lift kit decide your ride height: choose the adjustability of PRORYDE Suspension Systems products and get it EXACTLY the way you want it.
TOYOTA TUNDRA & SEQUOIA ADJUSTABLE FRONT LIFT LEVELING KIT
Patented ON-VEHICLE ADJUSTABLE design allows front lift
options from 2.0″ to 3.5″, or anywhere in between.
SEMA BEST NEW OFFROAD/4×4
PRODUCT OF THE YEAR!
LIFT RANGE: 2.0″ TO 3.5″
MAX TIRE/WHEEL: 33″
INSTALL TIME: 2.2 HRS
Not for use on Tundra TRD PRO w/Bilstein strutsRated 5.00 out of 5$269.00 EXCL. STATE TAX